Tricycle Motorized Drift in 8 Steps


Tricycle motorized Drift !!! (7/8 steps)

Step 7: Other Bits and Pieces

ChainCut the chain to the waist, I did not have a chain break, but had a carpenter tie I ran away with a grinder using and angle to grind the head From the spit off and it joins with the joined joint.


Chain is overwritten with sprockets and joined, using keys, fine-tune the alignment by moving the sprocket on to straighten the path of the chain

Chain tensioner

A basic bike chain tensioner has been welded in alignment with the chain and can be slipped up and down at the adjusted chain tension.

Exhaust gas

Exhaust was purchased online and developed more power and sounded much better

Fuel tank

The fuel tank in the picture is a bottle of drink that I do not recommend as it is not rated for fuel.

It has since been changed to a lawn mower tank, which I got for free in a lawn mower store

The throttle

I used a standard throttle cable connected to a brake lever on the right side of the handlebars. I found it better than throttle twist due to the amount of rotation you make and how this affects the throttle.